ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: EAW 650e on top of JBL SRX728S subs  (Read 1623 times)

Andrew Klingensmith

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 50
    • In Tune Rentals LLC
EAW 650e on top of JBL SRX728S subs
« on: December 03, 2012, 02:22:18 pm »

Hello

I was wondering if anyone has been using the above set up. I would love advise on a processor set up

Tops are just being run bi-amp. We have a few processors right now.....since the rig is very new to us, in the very short term we have been running the EAW ux8800 "Guniess" processor for the tops only (again, in bi-amp and we are usig the suggested EAW grey box settings) and for the lows off an aux send, a Electro Voice DC-1 digital processor which had a different sub patch on board (the patch is actually for a qrx 218)

I also have a dbx 480 sitting around not doing much these days....

My goal would be to just get everything off the UX8800 which has plenty of ins and outs.

Any suggestions for crossover points, etc much appreciated.

THANK YOU!
Andy



Logged
Andrew

In Tune Rentals LLC
Backline Specialist
248 735-0000

Riley Casey

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1583
Re: EAW 650e on top of JBL SRX728S subs
« Reply #1 on: December 03, 2012, 04:21:50 pm »

Both JBL and EAW have long recommended an 80 hz crossover between sub and top box in this configuration.  The JBL web site has pdfs with processor settings for the SRX line.

Andrew Klingensmith

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 50
    • In Tune Rentals LLC
Re: EAW 650e on top of JBL SRX728S subs
« Reply #2 on: December 03, 2012, 05:24:50 pm »

Appreciated. I guess I'm starting there. THANK YOU
Logged
Andrew

In Tune Rentals LLC
Backline Specialist
248 735-0000

ProSoundWeb Community

Re: EAW 650e on top of JBL SRX728S subs
« Reply #2 on: December 03, 2012, 05:24:50 pm »


Pages: [1]   Go Up
 



Page created in 0.026 seconds with 23 queries.