ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Introduction - I'm new here :)  (Read 4578 times)

Doug Fowler

  • Member since May 1995, 2nd poster on original LAB, moderator on and off since 1997, now running TurboMOD v1.826
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1695
  • Saint Louis, MO USA
Re: Introduction - I'm new here :)
« Reply #10 on: November 16, 2012, 04:36:38 pm »

Who's Phil Graham? ;)

Phill Graham's cousin. 
Logged
"It's got electrolytes.  It's got what plants crave."

Bob Leonard

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6807
  • Boston, MA USA
Re: Introduction - I'm new here :)
« Reply #11 on: November 16, 2012, 05:35:20 pm »

Nice to meet you Phil. Don't pay attention to those other guys above, most of them are DJs. If you really want some good sound from the kick drum it's best that you duct tape a Realistic mic to the front of the drum pointing up towards the simballs. And don't let these guys fool you. The hole in the front is where you put the left over cable so no one trips on it.
Logged
BOSTON STRONG........
Proud Vietnam Veteran

I did a gig for Otis Elevator once. Like every job, it had it's ups and downs.

Nick Enright

  • Full Member
  • ***
  • Offline Offline
  • Posts: 241
  • Detroit, MI
Re: Introduction - I'm new here :)
« Reply #12 on: November 25, 2012, 11:07:26 am »

Hello all,

My name is Phil, and I'm new to prosoundweb ;-p

I just wanted to introduce myself and ask about kick drum mics.

Cheers,

PS does the posting captcha eventually go away?

I prefer  to dip all my mics in LN2 -- cryogenic treatment more accurately aligns the molecules of the metals in the wires, while also reducing the inherent vibrations in the structure of the polymer diaphragms. It's like turning the talent knob to 11.

Good to see ya again.
Logged
Nick Enright
Owner / Engineer
Lyve Productions
Detroit, MI

Marjan Milosevic

  • Full Member
  • ***
  • Offline Offline
  • Posts: 229
    • MM-acoustics
Re: Introduction - I'm new here :)
« Reply #13 on: November 29, 2012, 05:54:11 am »

Nice to meet you Phil. Don't pay attention to those other guys above, most of them are DJs. If you really want some good sound from the kick drum it's best that you duct tape a Realistic mic to the front of the drum pointing up towards the simballs. And don't let these guys fool you. The hole in the front is where you put the left over cable so no one trips on it.

Lol, i have a band over here that is doing exactly that :-)

ProSoundWeb Community

Re: Introduction - I'm new here :)
« Reply #13 on: November 29, 2012, 05:54:11 am »


Pages: 1 [2]  All   Go Up
 



Page created in 0.075 seconds with 25 queries.