ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Yorkville PSA1 and dbx driverack  (Read 1517 times)

Mark Foley

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Yorkville PSA1 and dbx driverack
« on: October 27, 2012, 04:53:51 pm »

Forgive a very new/green question...

I recently purchased a Yorkville PSA1 and was thinking of possible adding a dbx driverack.  Anyone using the two?  Looking through the driverack manual, did not see any settings for the Yorkville array....
Logged

Phil Hornung

  • Newbie
  • *
  • Offline Offline
  • Posts: 40
Re: Yorkville PSA1 and dbx driverack
« Reply #1 on: October 30, 2012, 04:52:58 pm »

Forgive a very new/green question...

I recently purchased a Yorkville PSA1 and was thinking of possible adding a dbx driverack.  Anyone using the two?  Looking through the driverack manual, did not see any settings for the Yorkville array....

The PSA-1 is self powered isn't it? Doesn't need a driverack (cross-over / speaker processor). It's all built in.
Logged

ProSoundWeb Community

Re: Yorkville PSA1 and dbx driverack
« Reply #1 on: October 30, 2012, 04:52:58 pm »


Pages: [1]   Go Up
 



Page created in 0.037 seconds with 22 queries.