ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: JBL srx 718S settings  (Read 2745 times)

Mads Aure

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
JBL srx 718S settings
« on: October 14, 2012, 11:56:28 PM »

Hello.

is there anybody who have settings for this speaker by useing 3rd part processor?
Like the Ashly or EAW type processor?
Is it possible to recalculate original DBX setting over to EAW UX8800 setting?
Reason i ask is, far as i know the DBX settings can only  be used on harman stuff.
Logged
Mads Aure
Full time weekend warrior

Chris Chambers

  • Full Member
  • ***
  • Offline Offline
  • Posts: 155
  • Melbourne, Australia
    • MAD Productions
Re: JBL srx 718S settings
« Reply #1 on: October 15, 2012, 07:15:03 AM »

Hello.

is there anybody who have settings for this speaker by useing 3rd part processor?
Like the Ashly or EAW type processor?
Is it possible to recalculate original DBX setting over to EAW UX8800 setting?
Reason i ask is, far as i know the DBX settings can only  be used on harman stuff.

5th line in the spec sheet.

http://www.jblpro.com/BackOffice/ProductAttachments/JBL.SRX718S[1].pdf

Pretty standard cross frequency for subs

Matt Vivlamore

  • Lab Lounge
  • Hero Member
  • *
  • Offline Offline
  • Posts: 591
  • Southern Maryland
    • https://www.facebook.com/MeerkatSound/
Re: JBL srx 718S settings
« Reply #2 on: October 15, 2012, 01:05:25 PM »

Hey Chris; those are just the basic specs.  If you look at the DR480/0 and Itechs, the specs are more in-depth and there are 2 (maybe 3) addition points of EQing on the response.
Logged
We're based in Southern Maryland, and LIKE us on Facebook: https://www.facebook.com/MeerkatSound/

ProSoundWeb Community

Re: JBL srx 718S settings
« Reply #2 on: October 15, 2012, 01:05:25 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.034 seconds with 23 queries.