Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Michael J Williams]

Quick Question.
Can you link 2 Pro2 for extra fader control?

[Scott B Nelson]

Quick Question.
Can you link 2 Pro2 for extra fader control?

As I understand it (I've read everything I can about it  ) you can; but you are limited by the number of connections you have.  Each SuperMac AES50 port can handle 48 channels, bi-directional, and often you reserve an extra as a hot backup.  You can connect them to external equipment or to consoles.  But when you run out, ... ...

[Midas Techsupport]

Quick Question.
Can you link 2 Pro2 for extra fader control?

Simple answer is no. The easiest way for extra fader control is by using the Mixtender app, and connect an iPad for every 8 extra faders required. If you have enough iPads, then you could have a fader available for every input on the console if you really want!
Once you get used to the way the POP groups and VCA navigation works as well as the 'EXTEND' button, you will hopefully see that extra faders aren't generally needed.

Regards

Rob Hughes

[Mac Kerr]

Simple answer is no. The easiest way for extra fader control is by using the Mixtender app, and connect an iPad for every 8 extra faders required. If you have enough iPads, then you could have a fader available for every input on the console if you really want!
Once you get used to the way the POP groups and VCA navigation works as well as the 'EXTEND' button, you will hopefully see that extra faders aren't generally needed.

The Midas Techsupport team was given a bye on the real name policy (and other manufactures will be allowed the same privilege) so that multiple users could reply. That exemption was based on the actual person replying having their real name in a signature line at the bottom of the message. Any further posts without the real name of the person posting will be deleted.

Mac

[Midas Techsupport]

The Midas Techsupport team was given a bye on the real name policy (and other manufactures will be allowed the same privilege) so that multiple users could reply. That exemption was based on the actual person replying having their real name in a signature line at the bottom of the message. Any further posts without the real name of the person posting will be deleted.

Mac

Sorted. Sorry Mac, after posting with an automatic signature, I totally forgot. Apologies, and hopefully I won't forget in future! 

Errrr. sorry, again..... Rob Hughes

[Tim McCulloch]

Sorted. Sorry Mac, after posting with an automatic signature, I totally forgot. Apologies, and hopefully I won't forget in future! 

Uh... Gert or whoever... you just did it, again.

[Lefteris Neokosmidis]

Hello Rob. Two more questions.
1) Is it possible to link two input channels through the show editor?
2) Is there any chance to have a choise of 8 effect slots with no GEQ at all, in a future firmware update? Too many astonishing phsycoacoustics proccessors!!!

[Midas Techsupport]

Hello Rob. Two more questions.
1) Is it possible to link two input channels through the show editor?
2) Is there any chance to have a choise of 8 effect slots with no GEQ at all, in a future firmware update? Too many astonishing phsycoacoustics proccessors!!!

Hi Lefteris,

1. Unfortunately not. I am unsure whether this can be done in the future either, but I will try and find out.
2. Not at present, but this is high on our list of future feature requests, and has been asked for on many occasions. I will let you know a definitive answer as soon as I can find out if this is possible at some point in the future.

Regards

Rob Hughes

[Peter Smit]

I was doing a gig recently and was bitten by that the VCA mute did not mute the sends.

As somebody else already asked:

     1) VCA Mutes as many others have stated it would be nice to be able to select a mode that would mute the physical channels not just the main output of them.

Would it be possible to have a configuration option for that?

[Midas Techsupport]

I was doing a gig recently and was bitten by that the VCA mute did not mute the sends.

As somebody else already asked:

Would it be possible to have a configuration option for that?

Hi Peter,

No, this is not going to become an option, as it simply is not how a VCA works. This is what we have mute groups for.

Regards

Rob Hughes

[ProSoundWeb Community]