ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [3]  All   Go Down

Author Topic: Yamaha and a Digital Snake.....  (Read 21914 times)

Justice C. Bigler

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 2794
  • Tulsa, Oklahoma
    • My homepage
Re: Yamaha and a Digital Snake.....
« Reply #20 on: September 28, 2012, 08:43:48 PM »

Out of curiosity, what do a pair of Dante MY cards and a Rio rack cost?

Yamaha is holding their dealers to a hard floor price on the CL and RIO boxes. In our recent bid, every vendor bid the exact same price for the RIO3224D I/O boxes, $7,649.10. The MY16-AUD cards I have been quoted between $520 and $535 depending on the week.
Logged
Justice C. Bigler
Business Rep, IATSE Local 354
www.justicebigler.com

Aaron Johnson

  • Newbie
  • *
  • Offline Offline
  • Posts: 8
    • Johnson AV Engineering
Re: Yamaha and a Digital Snake.....
« Reply #21 on: November 01, 2012, 12:00:03 PM »

So does anyone have any experience yet with this setup?  PM5D-RH w/ 2 Dante-MY16-AUD cards to Rio3224-D.  I'm assuming that in order to get all channels to show up, you need two Dante cards.

Experiences please.
Logged
Aaron

Johnson AV Engineering

Andrew Makinson

  • Full Member
  • ***
  • Offline Offline
  • Posts: 104
Re: Yamaha and a Digital Snake.....
« Reply #22 on: November 01, 2012, 02:27:49 PM »

So does anyone have any experience yet with this setup?  PM5D-RH w/ 2 Dante-MY16-AUD cards to Rio3224-D.  I'm assuming that in order to get all channels to show up, you need two Dante cards.

Experiences please.

None, but I have experience with CL5s, Rio, PM5D, PM5D-EX (with DSP5D), DSP5D with no surface using pc control only.  Not knowing your situation, my thought is that you would do better with spending a little more and getting a DSP5D.  If you already have the RIO then it's back to your original question.
Logged
--
Andrew Makinson
Grace Covenant Church
Chantilly, VA

Ivan Feder

  • Full Member
  • ***
  • Offline Offline
  • Posts: 119
  • Paris, France
Re: Yamaha and a Digital Snake.....
« Reply #23 on: November 03, 2012, 06:55:25 AM »

16 channels @ 48K; 8 channels @ 96K.
( per card of course)

So does anyone have any experience yet with this setup?  PM5D-RH w/ 2 Dante-MY16-AUD cards to Rio3224-D.  I'm assuming that in order to get all channels to show up, you need two Dante cards.

Experiences please.
Logged

ProSoundWeb Community

Re: Yamaha and a Digital Snake.....
« Reply #23 on: November 03, 2012, 06:55:25 AM »


Pages: 1 2 [3]  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.023 seconds with 24 queries.