ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Changing Color Scale on Spectrgram in Systune  (Read 2830 times)

David Sturzenbecher

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1968
  • So. Dak.
    • Sturz Audio
Changing Color Scale on Spectrgram in Systune
« on: August 20, 2012, 10:36:50 PM »
I have what should be a very easy question.  How do I change the color scale (Color Mapping) on the spectrogram in Systune?  The manual says "Check the Spectrum graph at the bottom for the approximate minimum and maximum levels you would like to see"  However, when I change the scale on the spectrum page, the spectrogram doesn't seem to follow, nor can I find anything that relates anything to the color map settings window seen in the manual. Thanks!
Logged
Audio Systems Design Engineer
Daktronics, Inc.
CTS-D, CTS-I
AES Full Member

Doug Fowler

  • Member since May 1995, 2nd poster on original LAB, moderator on and off since 1997, now running TurboMOD v1.826
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2331
  • Saint Louis, MO USA
Re: Changing Color Scale on Spectrgram in Systune
« Reply #1 on: August 21, 2012, 12:22:14 AM »
Quote from: David Sturzenbecher on August 20, 2012, 10:36:50 PM
I have what should be a very easy question.  How do I change the color scale (Color Mapping) on the spectrogram in Systune?  The manual says "Check the Spectrum graph at the bottom for the approximate minimum and maximum levels you would like to see"  However, when I change the scale on the spectrum page, the spectrogram doesn't seem to follow, nor can I find anything that relates anything to the color map settings window seen in the manual. Thanks!

Double click on the color bar :-)
Logged
Brawndo, the Thirst Mutilator. 
It's got electrolytes. 
It's got what plants crave.

David Sturzenbecher

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1968
  • So. Dak.
    • Sturz Audio
Re: Changing Color Scale on Spectrgram in Systune
« Reply #2 on: August 21, 2012, 07:57:27 AM »
Quote from: Doug Fowler on August 21, 2012, 12:22:14 AM
Double click on the color bar :-)

Well....how about that. Thanks!
Logged
Audio Systems Design Engineer
Daktronics, Inc.
CTS-D, CTS-I
AES Full Member

ProSoundWeb Community

Re: Changing Color Scale on Spectrgram in Systune
« Reply #2 on: August 21, 2012, 07:57:27 AM »

Pages: [1]   Go Up
« previous next »
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.04 seconds with 24 queries.