ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: If you don't understand the numbers...  (Read 1953 times)

Jonathan Kok

  • Full Member
  • ***
  • Offline Offline
  • Posts: 206
  • Toronto
If you don't understand the numbers...
« on: September 26, 2012, 11:37:02 AM »

...don't write the damn spec.

Quote
The loudspeaker system shall be a two-way, full range design consisting of a 10 inch woofer, a high frequency compression driver and a passive crossover/equalizer network.
The loudspeaker shall meet the following performance criteria:
. frequency response of 50-16,000 Hz -3db;
. power handling of 101 dB SPL at 1 meter

This...for a small meeting room. ???
Logged

Joseph D. Macry

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 425
  • Austin TX
Re: If you don't understand the numbers...
« Reply #1 on: September 26, 2012, 11:55:17 AM »

Or if you don't understand the procduct.
Reading spec for a school gym: Speaker shall be Optiplex SP820A.
Umm, you mean OctaSound. Optiplex is a Dell computer.
I've told the consultant this before.
Logged
Joseph Macry,
Austin, TX

Brad Weber

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2209
  • Marietta, GA
Re: If you don't understand the numbers...
« Reply #2 on: September 27, 2012, 06:52:02 AM »

Or if you don't understand the procduct.
Reading spec for a school gym: Speaker shall be Optiplex SP820A.
Umm, you mean OctaSound. Optiplex is a Dell computer.
I've told the consultant this before.
"Octasound" and "consultant" should not be used together.
Logged

ProSoundWeb Community

Re: If you don't understand the numbers...
« Reply #2 on: September 27, 2012, 06:52:02 AM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.035 seconds with 21 queries.