ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Check my custom Avid Profile laptop stand  (Read 3070 times)

Kristo Kotkas

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 89
    • Eventech
Check my custom Avid Profile laptop stand
« on: August 08, 2012, 03:34:20 pm »

Posting it here too, someone might get inspired...

You know that moment when you realize there is no more free cases at FOH to put your laptop on, or even if there was, there is no room... 

Here is the solution - laptop holder from customized AVID spare parts!

Check It Out!
Logged

Eddy Houk

  • Newbie
  • *
  • Offline Offline
  • Posts: 14
Re: Check my custom Avid Profile laptop stand
« Reply #1 on: August 08, 2012, 06:10:10 pm »

Where did you get the parts from? Did you order them from Avid? That looks great!

Posting it here too, someone might get inspired...

You know that moment when you realize there is no more free cases at FOH to put your laptop on, or even if there was, there is no room... 

Here is the solution - laptop holder from customized AVID spare parts!

Check It Out!
Logged

Kristo Kotkas

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 89
    • Eventech
Re: Check my custom Avid Profile laptop stand
« Reply #2 on: August 08, 2012, 06:29:34 pm »

Where did you get the parts from? Did you order them from Avid? That looks great!

Yes, ask your dealer, they can get you the monitor arm, bolts-nuts and an SC48 laptop plate. You can find the part numbers on one of my pics. The only non-Avid parts I used were the 4 small bolts-nuts that connect the SC48 plate to the bent monitor arm.

The only tricky part is to get the monitor arm correctly bent, as you might see on the video clip I used a friends help who has a metal shop and was able to bend mine with that big special machine.
Logged

Steven Barnes

  • Full Member
  • ***
  • Offline Offline
  • Posts: 232
    • SBTS Inc.
Re: Check my custom Avid Profile laptop stand
« Reply #3 on: August 08, 2012, 07:14:17 pm »

Yes, ask your dealer, they can get you the monitor arm, bolts-nuts and an SC48 laptop plate. You can find the part numbers on one of my pics. The only non-Avid parts I used were the 4 small bolts-nuts that connect the SC48 plate to the bent monitor arm.

The only tricky part is to get the monitor arm correctly bent, as you might see on the video clip I used a friends help who has a metal shop and was able to bend mine with that big special machine.

Very nice work, I might have to build something like this, it would be really handy to have on tour.
You can bend it with a vise and 2 hand if you cannot find a break press.
Logged
Audio Engineering, Design, Consulting
SBTS Inc.
www.sbts-inc.com
Pages: [1]   Go Up
 


Page created in 0.024 seconds with 24 queries.