ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Midi port creation for wireless 01V96 access?  (Read 1735 times)

Rob Spence

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3531
  • Boston Metro North/West
    • Lynx Audio Services
Midi port creation for wireless 01V96 access?
« on: May 30, 2012, 12:20:39 PM »
Ok, it has been a long time since I did this and cannot remember how.

I replaced my router connected to my Silex USB router and replaced the laptop I used to use for runing Studio Manager.

I have verified wired operation to the 01V96.
The Silex virtual connection indicates a connection to the 01V96 over the wireless.

Now I need to create the midi ports to use the network so they show up in SM.

Help?
Logged
rob at lynxaudioservices dot com

Dealer for: AKG, Allen & Heath, Ashley, Astatic, Audix, Blue Microphones, CAD, Chauvet, Community, Countryman, Crown, DBX, Electro-Voice, FBT, Furman, Heil, Horizon, Intellistage, JBL, Lab Gruppen, Mid Atlantic, On Stage Stands, Pelican, Peterson Tuners, Presonus, ProCo, QSC, Radial, RCF, Sennheiser, Shure, SKB, Soundcraft, TC Electronics, Telex, Whirlwind and others

Rob Spence

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3531
  • Boston Metro North/West
    • Lynx Audio Services
Re: Midi port creation for wireless 01V96 access?
« Reply #1 on: May 30, 2012, 04:51:37 PM »
Hmm, I just thought of a couple of things...
Perhaps I need to reinstall the Yamaha midi driver?
Perhaps MidiYoke is still installed?

Off to check...
Logged
rob at lynxaudioservices dot com

Dealer for: AKG, Allen & Heath, Ashley, Astatic, Audix, Blue Microphones, CAD, Chauvet, Community, Countryman, Crown, DBX, Electro-Voice, FBT, Furman, Heil, Horizon, Intellistage, JBL, Lab Gruppen, Mid Atlantic, On Stage Stands, Pelican, Peterson Tuners, Presonus, ProCo, QSC, Radial, RCF, Sennheiser, Shure, SKB, Soundcraft, TC Electronics, Telex, Whirlwind and others

Rob Spence

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3531
  • Boston Metro North/West
    • Lynx Audio Services
Re: Midi port creation for wireless 01V96 access?
« Reply #2 on: May 30, 2012, 06:06:12 PM »
Fixed.

I needed to reinstall the Midi Driver from Yamaha.

Neat thing is that when I walk out of range (easy to do in the basement with much steel and concrete), it disconnects as expected but when I get closer it reconnects and picks up where it should be.
Logged
rob at lynxaudioservices dot com

Dealer for: AKG, Allen & Heath, Ashley, Astatic, Audix, Blue Microphones, CAD, Chauvet, Community, Countryman, Crown, DBX, Electro-Voice, FBT, Furman, Heil, Horizon, Intellistage, JBL, Lab Gruppen, Mid Atlantic, On Stage Stands, Pelican, Peterson Tuners, Presonus, ProCo, QSC, Radial, RCF, Sennheiser, Shure, SKB, Soundcraft, TC Electronics, Telex, Whirlwind and others

ProSoundWeb Community

Re: Midi port creation for wireless 01V96 access?
« Reply #2 on: May 30, 2012, 06:06:12 PM »

Pages: [1]   Go Up
« previous next »
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.039 seconds with 25 queries.