ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: DMX cable - Spool  (Read 3613 times)

Nate Armstrong

  • Full Member
  • ***
  • Offline Offline
  • Posts: 228
DMX cable - Spool
« on: March 20, 2013, 12:25:24 PM »

I am in the market for a  spool of high quality dmx cable.
I am also looking for bulk amount of neutrik NC3FXX connectors   

I have read belden is a good cable.
I rather spend a bit more and have something easier to work with.
In the past often times when i strip the black jacket the  insulation gets nicked a bit on the 3 conductors on the inside.  Generally the conductors themselves are very small gauge as well.

The Neutrik connectors and cable doesn't have to come from the same store.
Thank you.
Logged

Zachary Zimmerman

  • Full Member
  • ***
  • Offline Offline
  • Posts: 110
  • Shenandoah, VA USA
Re: DMX cable - Spool
« Reply #1 on: March 20, 2013, 12:56:33 PM »

I am in the market for a  spool of high quality dmx cable.
I am also looking for bulk amount of neutrik NC3FXX connectors   

I have read belden is a good cable.
I rather spend a bit more and have something easier to work with.
In the past often times when i strip the black jacket the  insulation gets nicked a bit on the 3 conductors on the inside.  Generally the conductors themselves are very small gauge as well.

The Neutrik connectors and cable doesn't have to come from the same store.
Thank you.

A great place to get nc3fxx is camel traders they have the best prices around.
I do not work for them or have any affiliation. I am just a happy customer. They also have some bulk cables.
Logged
Hey Y'all watch this

Josh Daws

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 335
Re: DMX cable - Spool
« Reply #2 on: March 20, 2013, 06:38:37 PM »

http://www.rapcohorizon.com/p-593-1-pr-dmx-digital.aspx

i have been extremely happy with the Rapco product. great price since they manufacture their own cable. in fact i constantly use this in a lot of installations i do! :)
Logged

Nate Armstrong

  • Full Member
  • ***
  • Offline Offline
  • Posts: 228
Re: DMX cable - Spool
« Reply #3 on: March 21, 2013, 10:07:52 AM »

cameltraders has a great price on Neutrik connectors !! thanks ...

I think I want to go with Tourflex , Duraflex  or Belden ( 9729, 8227 or 3105A )  Dmx cable ( 120 ohm) I am just not finding many sources that sell them.

so far I can only find duraflex at .55 a foot.  I haven't even found a source for belden.
Logged

Scott Hofmann

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 397
Re: DMX cable - Spool
« Reply #4 on: March 21, 2013, 10:18:17 AM »

Markertek and Mouser Electronics both sell Belden among others.
Logged
Scott Hofmann

ProSoundWeb Community

Re: DMX cable - Spool
« Reply #4 on: March 21, 2013, 10:18:17 AM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.026 seconds with 22 queries.