Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Jakob Grimm]

Been lurking here for a few years...finally put some of what I've learned to use.  Snapped a couple shots of my latest setup at a recent show.  Rear truss with drape on LS-11's with two Colorstorms and RGB Pucks split among the band and the screens (30" aluminum screening from Home Depot zip-tied to 1" conduit) with PAR64's out front.

[Thomas Bishop]

That looks great!  Good use of non-theatrical materials to get an amazing textured look.

[Tim Padrick]

How did you get that rumpled look from screen?

[Jakob Grimm]

How did you get that rumpled look from screen?

Just did it with my bare hands.  It took some experimenting on how to get a semi-even look to it (and some re-straightening for some of the parts that looked too crazy).

I've seen a lot of church stage designs use this idea and they usually hit the screens from the bottom as well with additional LEDs which I'd like to add eventually.

[John Livings]

Is it an open mesh screen, or is it "Foil"?

BTW, looks nice.

Regards,  John

[Jakob Grimm]

Is it an open mesh screen, or is it "Foil"?

BTW, looks nice.

Regards,  John

Thanks John.

I guess you would call it open mesh -- this is what I used:

http://www.homedepot.com/h_d1/N-25ecodZ5yc1v/R-202176172/h_d2/ProductDisplay?catalogId=10053&langId=-1&keyword=screen&storeId=10051

[Craig Leerman]

Great job!

[ProSoundWeb Community]