ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Yorkville tx4  (Read 1525 times)

Shawn Spader

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Yorkville tx4
« on: February 16, 2012, 07:14:17 pm »

 My customer has 4 tx4's. Two of the horns won't receive any signal from the amp. I took my toner and made a test speakon plug to test the horns in the cabinet. When I send a tone with the test speakon plug at the cabinet I get a tone coming through the horn. But when I try sending the tone through the wire from the amp location to the cabinet I don't hear any tone. I know the wire length is not the issue since the other two are the same distance away from the amp and I get a tone through those horns. Any idea what the problem could be?

Thank you

ProSoundWeb Community

Yorkville tx4
« on: February 16, 2012, 07:14:17 pm »

Pages: [1]   Go Up

Page created in 0.039 seconds with 24 queries.