ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Driverack 260 for QRX 212/75 over QRX 218  (Read 1844 times)

Steve Alves

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
  • South Florida
    • South Florida Sound
Driverack 260 for QRX 212/75 over QRX 218
« on: February 26, 2012, 11:46:47 am »

I have the settings from EV but was wondering if anyone has the driveware file stored and would send it to me. I am not the master of keying these things into Driverack and I figure someone here must have the settings file for Driveware already saved.

6 channel (biamp 212/75) stereo mains and subs.


Here is what EV sent me if anyone else needs it.
Logged
Steven Alves
South Florida Sound, Fort Lauderdale, FL
www.southfloridasound.com

Bob Leonard

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6807
  • Boston, MA USA
Re: Driverack 260 for QRX 212/75 over QRX 218
« Reply #1 on: February 26, 2012, 03:13:11 pm »

If you have a driverack 260 then attach a null modem serial cable to the 260 and a computer. Load drivware and you can then insert the parameters easily.
Logged
BOSTON STRONG........
Proud Vietnam Veteran

I did a gig for Otis Elevator once. Like every job, it had it's ups and downs.

Steve Alves

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
  • South Florida
    • South Florida Sound
Re: Driverack 260 for QRX 212/75 over QRX 218
« Reply #2 on: February 26, 2012, 06:54:03 pm »

If you have a driverack 260 then attach a null modem serial cable to the 260 and a computer. Load drivware and you can then insert the parameters easily.

That is what I have setup. Not really sure about entering them (especially the high shelf). Thought someone may have them (or an improved version) already saved.

I started to put them in but they did not seem correct.

Logged
Steven Alves
South Florida Sound, Fort Lauderdale, FL
www.southfloridasound.com

Mike Pyle

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 968
  • Santa Rosa, CA
Re: Driverack 260 for QRX 212/75 over QRX 218
« Reply #3 on: February 27, 2012, 11:22:33 am »

If you are going to use a processor take the time to completely familiarize yourself with manually loading and changing the settings.
Logged
Mike Pyle  Audiopyle Sound  707-315-6204
Dealer For: JBL, Soundcraft, Crown, dbx, AKG, Yorkville, EV, QSC, RCF, FBT, Danley Sound Labs, Fulcrum Acoustic, Tannoy, Lab Gruppen, Powersoft, Linea Research, VTC, EAW, Allen & Heath, Ashly, APB, Audix, One Systems, OnPoint Audio, Presonus, K&M, Ultimate, Global Truss, Road Ready, SKB, Gator, Radial Engineering, Turbosound, Midas, dB Technologies, American DJ, Odyssey, ProCo, Rapco, CBI, Elation, Mipro, Chauvet, Blizzard, Shure, Whirlwind, Bassboss, Yamaha, Line 6, Behringer, Whirlwind, On-Stage, more...

ProSoundWeb Community

Re: Driverack 260 for QRX 212/75 over QRX 218
« Reply #3 on: February 27, 2012, 11:22:33 am »


Pages: [1]   Go Up
 



Page created in 0.034 seconds with 23 queries.