ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Cable Storage at shop  (Read 8941 times)

Steven Barnes

  • Full Member
  • ***
  • Offline Offline
  • Posts: 232
    • SBTS Inc.
Cable Storage at shop
« on: November 02, 2011, 01:31:19 pm »

Hello All,
We are getting ready to move a division of our shop, and redo our production shop. I am looking for some ideas for cable storage. Looking to store somewhere around 15000' of NL2, 10000' of NL4, 5000'+ of edison, 15000'+ of XLR. All in various lengths.

We have a custom wall built in the middle of the shop at the moment built out of wood with 2x4's running horizontally out of the wall for cable storage, but we are looking for something a little more permanent. Will probably end up welding something up.

Any ideas and pics would be greatly appreciated.

Logged
Audio Engineering, Design, Consulting
SBTS Inc.
www.sbts-inc.com

Earl F Young

  • Full Member
  • ***
  • Offline Offline
  • Posts: 195
  • location: Surface of the SUN. az/ ca
Re: Cable Storage at shop
« Reply #1 on: November 02, 2011, 02:23:22 pm »

Hello All,
We are getting ready to move a division of our shop, and redo our production shop. I am looking for some ideas for cable storage. Looking to store somewhere around 15000' of NL2, 10000' of NL4, 5000'+ of edison, 15000'+ of XLR. All in various lengths.

We have a custom wall built in the middle of the shop at the moment built out of wood with 2x4's running horizontally out of the wall for cable storage, but we are looking for something a little more permanent. Will probably end up welding something up.

Any ideas and pics would be greatly appreciated.

have you thought about soft goods storage wheeled bins? Not only can you roll them (to loading dock, etc) or into place of which system you are loading for, but the other end of this equation is you can load/ unload smaller cable cases with. Since they are typically canvas; you can put newly washed or mud-soaked cables in immediately- then clean off cables, rewrap and launder liner at your convenience.

FWIW: I like portable whatever; a cart can't be blocked like a wall can...
Logged

Rob Spence

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3427
  • Boston Metro North/West
    • Lynx Audio Services
Re: Cable Storage at shop
« Reply #2 on: November 02, 2011, 03:49:46 pm »

Some of these have hardwood bottom frames and you could use a forklift to place them in storage rack when not in active use?
Logged
rob at lynxaudioservices dot com

Dealer for: AKG, Allen & Heath, Ashley, Astatic, Audix, Blue Microphones, CAD, Chauvet, Community, Countryman, Crown, DBX, Electro-Voice, FBT, Furman, Heil, Horizon, Intellistage, JBL, Lab Gruppen, Mid Atlantic, On Stage Stands, Pelican, Peterson Tuners, Presonus, ProCo, QSC, Radial, RCF, Sennheiser, Shure, SKB, Soundcraft, TC Electronics, Telex, Whirlwind and others

John durisko

  • Full Member
  • ***
  • Offline Offline
  • Posts: 107
Re: Cable Storage at shop
« Reply #3 on: November 08, 2011, 07:04:58 pm »

We use a product from The Light Source designed to hang a lighting grid.
http://www.thelightsource.com/products/11/view
This way when half way through the year we realize we need to add another 1000' of whatever we can rearrange the pipes a bit and keep on moving on. I think we cut a bunch of horizontal pipes to 2.5' for cable and the verticals in our facility are just about 13' and the "wall" is about 30' long. It is nice bc I can quickly look to see if there is cable out. All pipes are loaded to the end.
Logged

No Name

  • SR Forums
  • Newbie
  • *
  • Offline Offline
  • Posts: 44
    • Stage Electrics UK
Re: Cable Storage at shop
« Reply #4 on: November 22, 2011, 03:36:47 am »

Hey,
We use a 48mm scaff frame for all of our small guage cable (xlr, audio jumpers).  This frame is bolted directly into the floor with lots of protruding pegs for cable.  The heavy cable (NL4, Power, Soca etc) is all stored in stillages (http://www.stepsandstillages.co.uk/stillages_range.asp) which are basically heavy duty metal cages.  They can stack, lock together and even with 400kg of powerlock inside, are easy to handle with a forklift.

See pics below:

Cheers
Adam
Logged
Kind Regards,
Adam Finlayson

No Name

  • SR Forums
  • Newbie
  • *
  • Offline Offline
  • Posts: 44
    • Stage Electrics UK
Re: Cable Storage at shop
« Reply #5 on: November 22, 2011, 03:37:53 am »

the stillages:
Logged
Kind Regards,
Adam Finlayson

No Name

  • SR Forums
  • Newbie
  • *
  • Offline Offline
  • Posts: 44
    • Stage Electrics UK
Re: Cable Storage at shop
« Reply #6 on: November 22, 2011, 03:38:38 am »

and again:
Logged
Kind Regards,
Adam Finlayson

ProSoundWeb Community

Re: Cable Storage at shop
« Reply #6 on: November 22, 2011, 03:38:38 am »


Pages: [1]   Go Up
 



Page created in 0.111 seconds with 23 queries.