Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Weogo Reed]

Hi Y'all,

Anybody heard the Community MX10?

22#, 1.25" HF exit, crossover at 1000Hz.

Use would be modest-level monitor on lower-budget folk-music stages.

Thanks and good health,  Weogo

[Weogo Reed]

Bump - anybody have experience with this box?

Thanks and good health,  Weogo

[Grant Conklin]

Hello Weogo,

I thought I'd resurrect your thread to see if others had experiences to share, and also to share a link with a real world review:  http://www.churchproduction.com/go.php/article/first_look_community_mx10_stage_monitor

I should point out that the dispersion is actually 100 degrees conical for the 10", not 115 as this article states.  I think the 8" is 115. 

I had been using FBT Verve 8m for small monitors, but they're being replaced by the Verve 108, which will be non-coax and not a wedge.  I think the mx10 might be just the ticket. 

Grant

[ProSoundWeb Community]