Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums > Lighting FUD Forum Archive
Simple Question
Mark Lonow:
hears a cool 1
http://www.coemar.com/prodotti_dettaglio.aspx?flag=eng&s tr_navigazione=&cerca=&id_categorie=98&page=1&am p;am p;am p;id_prodotti=425
but u still have to focus
so its mac 301,101/inpresions etx for pixle ledz atm
the future looks more like this:
http://www.vari-lite.com/index.php?src=directory&view=pr oducts&srctype=detail&refno=178619&category=Seri esVLX
http://www.elationlighting.com/ProductDetails.aspx?ItemNumbe r=1757&Category=Moving Head&txtSearch=
but dont be stuck on ledz
beam/acl type movers rock
impresions i think (maby 301) r on the cricle on the side stage of the rush clip. the colmar acl/s on the main us truss
http://www.coemar.com/eventi_dettaglio.aspx?id_prodotti=305& amp; amp; amp;id_eventi=393
Thomas Bishop:
Silas Pradetto wrote on Wed, 16 February 2011 20:36
I think, once you factor in dimming, socapex, trussing, feeder, and the cost of the fixtures, LEDs are going to win these days.
I figured someone would bring this up, and it's true, but only if you're looking at buying starting from 0. Most established companies have dimmers, soco, etc, so investing in LED's is basically starting over.
James Feenstra:
Thomas Bishop wrote on Wed, 16 February 2011 23:21
Silas Pradetto wrote on Wed, 16 February 2011 20:36
I think, once you factor in dimming, socapex, trussing, feeder, and the cost of the fixtures, LEDs are going to win these days.
I figured someone would bring this up, and it's true, but only if you're looking at buying starting from 0. Most established companies have dimmers, soco, etc, so investing in LED's is basically starting over.
true, except dimmers are easy to convert into straight power (hot patch them @ 100%...most dimmers can do this quite easily)
you still can use soca for LEDs, and not nearly as much of it
the trucking costs on LEDs are way cheaper, as are the upkeep costs
the main reason is the beam angle...there's very few LED pars out there that will shoot out a 5-8 degree beam with the same brightness as a 1K VNSP
personally I'm a huge advocate of 'green' lighting rigs, which is why I only sell LED products, and try to bring out power efficient rigs whenever possible
Navigation
[0] Message Index
[*] Previous page
Go to full version