ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: LS9 Recall Safe  (Read 3984 times)

Michael Lewis

  • Newbie
  • *
  • Offline Offline
  • Posts: 18
LS9 Recall Safe
« on: February 13, 2011, 07:33:22 AM »

I have a question. Can the output EQ section of the LS9 be recall safe?

I sometimes find it necessary to do some adjustment to the EQ for main / monitor EQ during a live show. Assuming there's a number of scene saved, is there a way to recall safe the output EQ so that it won't change when switching scenes during a live show?

Logged

Kirby Yarbrough

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 407
Re: LS9 Recall Safe
« Reply #1 on: February 13, 2011, 01:24:11 PM »

AFAIK, you can safe a specific mix, and one of the parameters is the EQ.
Logged

Dan Johnson

  • Full Member
  • ***
  • Offline Offline
  • Posts: 223
Re: LS9 Recall Safe
« Reply #2 on: February 15, 2011, 11:34:54 PM »

If you are talking about the graphic EQ in the rack, then you need to change the focus settings on all your scenes that you will be using.  You would want to turn off the "Rack" in the Focus settings.

If you are talking about the parametric EQ on each output, then you would use Recall Safe to do it.

Look at page 139-143 of the manual.
Logged
Pages: [1]   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.028 seconds with 20 queries.