ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All   Go Down

Author Topic: 'testing' mixing console by overloading gain?  (Read 5223 times)

Gareth Marsh

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 300
Re: 'testing' mixing console by overloading gain?
« Reply #10 on: February 08, 2011, 12:13:02 am »

Dave Binski wrote on Tue, 08 February 2011 05:46

 

He determined it was broke by inserting a SM57 into each channel, turning the gain completely up and noticing a slight signal blip on LED on the neighboring channels.



It wouldn't be inconceivable to assume that the 'slight signal blip' on neighbouring channels was, in fact, just light spill from the LEDs on the channel clipping its nut off.

In any case, the crosstalk must really bother him when he's mixing with every second channel peaking...


Gareth
Logged

Darrel Harris

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 99
Re: 'testing' mixing console by overloading gain?
« Reply #11 on: February 09, 2011, 12:56:47 am »

He's not your friend - he's an idiot.
Logged

Charlie Zureki

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4369
Re: 'testing' mixing console by overloading gain?
« Reply #12 on: February 09, 2011, 07:30:59 am »

Dave Binski wrote on Mon, 07 February 2011 13:14

Well, that answers that.  I am not nuts.  Thanks for the double check.



 Hello Dave,

  We haven't determined that you're "not nuts"....only that there's probably nothing wrong with your console. Razz

 Cheers,
 Hammer
Logged
Be prepared, you'll need it!
Pages: 1 [2]  All   Go Up
 

Page created in 0.059 seconds with 20 queries.