ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: DMX Interfaces  (Read 3858 times)

E. Lee Dickinson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1523
    • http://www.leedickinson.com
Re: DMX Interfaces
« Reply #10 on: December 30, 2010, 08:33:53 pm »

Unless you decide on software with a built in visualizer, yes, you will want to have an input dongle and an output dongle.
Logged
E. Lee Dickinson
Advanced Visual Production Inc.
sound - lighting - video - design
www.avpric.com

Zach Zaba

  • Newbie
  • *
  • Offline Offline
  • Posts: 17
Re: DMX Interfaces
« Reply #11 on: January 02, 2011, 02:39:57 pm »

Okay...so then I would take the programming dump it to my output dongle and the use an input dongle right next to it? Seems a little over the top and then odd to do on one machine.

I guess just the cost of flexibility or different softwares?
Logged

James Feenstra

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1574
    • http://www.crewspace.com/James
Re: DMX Interfaces
« Reply #12 on: January 02, 2011, 04:01:57 pm »

a lot of the 'bigger' visualizers can do internal routing

wysiwyg and esp vision for example can connect to most desks via Ethernet or in the case of software based consoles they can be routed internally without an i/o dongle

you do, however, need to purchase the dongles for these visualizers and they aren't cheap

wysiwyg perform is about $8000, esp vision is around the same i believe
Logged
James Feenstra
Lighting, Audio and Special Effects Design

Tony "T" Tissot

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3902
    • http://www.4dbsound.com
Re: DMX Interfaces
« Reply #13 on: January 02, 2011, 06:46:54 pm »

[quote title=Zach Zaba wrote on Sun, 26 December 2010 13:41

Has anyone extensively used the  model?
[/quote]
The "PRO" version with Light Factory. 1 out and 1 in to use for a stage setter for faders.

It will work with WYSIWYG (but I don't own a license - so I can't give you any current comments on efficacy) and Capture Polar - $500, but I have not used it.
Logged
MNGS
ProSoundWeb - Home of 50,000 audio professionals - and two or three curmudgeonly SOBs.
Pages: 1 [2]  All   Go Up
 

Page created in 0.052 seconds with 21 queries.