Duane Massey wrote on Mon, 06 December 2010 22:30 |
I'm finally going to step into the (low budget) world of software RTA-type stuff. I don't need to do full room analysis, just measure frq response at specific locations. I've got a medium cheap laptop to work with.
|
I guess that depends on what you mean by "RTA-type stuff". If you actually mean RTA and not FFT or Transfer Function type measurements, then the program Grant noted or any number of the free RTA programs out there might work for you.
If you do mean anything more advanced then most of the major analysis programs such as Smaart, SysTune and Praxis all have free demos you can download. They also all have a pretty steep learning curve if you have never used anything like them before.
The other factor in this is the acquisition end, as in how do you plan to get the audio into the software. You could use any microphone and the internal sound card of the laptop, however most people seem to prefer to use an external USB or FireWire audio interface and a measurement mic. Rational Acoustics, Audix and Behringer all offer some lower cost ($55 to $300) measurement microphones.
Other than the Studio 6 Digital of Faber Acoustical iPhone apps with an external mic, I wouldn't use them for system commissioning or performance verification, but if all you care about is seeing the relative levels versus frequency and don't care about absolute levels or accuracy, there are also several iPhone and Android RTA apps that are free or a couple of dollars.