Donnie Evans wrote on Tue, 07 December 2010 10:16 |
+3...
Get one of these for your processor:
|
sorry, i know the OP's issue has been resolved, but i have to jump in...
these adapters are an abomination that should never have been invented. why, you ask? well i'll tell you...
they always get plugged into a devices 1/4" jack with an additional xlr connector plugged into the end of them. this introduces a tremendous amount of leverage on the connector not to mention providing a very convenient 'pole' sticking out of your gear for you to trip/snag on. just a very, very bad idea.
if you must adapt 1/4" male to XLR female, please use a proper adapter wired out of separate connectors and a piece of wire, even if said wire is only 3 inches long. infinitely safer and easier to strain relief. that's the right/only way to do it.
brian