Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Roger Owens]

Does anybody know the part number for the 4 position phoenix connector that is about 1/2" by a 1/4" with a rectangularish key on the top?

[Rob Timmerman]

If it's actually a Phoenix connector, it's likely from the Combicon line.  I'd contact the equipment manufacturer for the part number, though, as there are both 5mm pitch and 5.08mm pitch versions, and they look the same.

[Tim Padrick]

Be sure to get the ones with the tail for cable strain relief.