ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: German made KME & KS Audio  (Read 5867 times)

Jamie Rose

  • Newbie
  • *
  • Offline Offline
  • Posts: 17
German made KME & KS Audio
« on: October 12, 2010, 11:09:17 am »

Any of you try or hear before the above products ? I heard KME has a very clean Vocal & natrual tone but I can't find any review. KS Audio ; looks good on paper & great installation references. Agian, no review on web as well. Please share your opinion. Thanks
Logged
Jamie

Steve Nichols

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
Re: German made KME & KS Audio
« Reply #1 on: November 12, 2010, 10:18:17 pm »

KS Sounds good. I chose the Seeburg A6 and TSM SUB Dp+. 1000w for low and highs with DSP and X-Over. Very clean and powerful. They use Powersoft modules.
Logged

Jamie Rose

  • Newbie
  • *
  • Offline Offline
  • Posts: 17
Re: German made KME & KS Audio
« Reply #2 on: November 15, 2010, 01:50:57 am »

Thanks. Are they better than ks or kme ? Never hear the name before. I log in the web, products seem impressive. Are the products original make in Germany?
Someone told me KS is same standard with Meyer Sound, true?.


Jamie Rose
Logged
Jamie

Steve Nichols

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
Re: German made KME & KS Audio
« Reply #3 on: November 15, 2010, 09:18:23 am »

Better is relative. All of the German stuff is built well. The KS appears to be top notch for sure. I chose the Seeburg because of the value.

They also have a speaker for every application. What are using them for?
Logged

Jamie Rose

  • Newbie
  • *
  • Offline Offline
  • Posts: 17
Re: German made KME & KS Audio
« Reply #4 on: November 19, 2010, 02:14:27 am »

For Installation ; churches, multipurpose hall & so on

For Sound Rental company both indoor & outdoor application.

Seeburg ; Seems like a very good product and with good range. Design also unique.

The price range seems like in between KS & KME.

German made stuff always has a very clean top unit but problems with bottom; unless you're willing to purchase more bass bin to settle the low frequency issue.The configuration always recommended as 1 top 2 sub. For US or Italy made speaker the configuration is 2 or 4 top 1 sub.

You are right, Seeburg is value for money compare to KS.
Logged
Jamie

Steve Nichols

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
Re: German made KME & KS Audio
« Reply #5 on: November 19, 2010, 10:18:08 am »

Check out the G-Sub with the 1800W 18" driver with a mechanical excursion of 70mm. I have a couple come for testing I will post a review.

I can tell you that the TSM SUB DP+ 15" amplified unit with DSP works well. 1000w for the lows and highs with DSP and X-over. I use them with the A6 12" 2way tops.
Logged
Pages: [1]   Go Up
 

Page created in 0.06 seconds with 21 queries.