ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: DIY Sub for Nexo  (Read 4410 times)

Cameron Micheal

  • Newbie
  • *
  • Offline Offline
  • Posts: 32
    • http://www.livesoundforum.com
DIY Sub for Nexo
« on: November 18, 2010, 11:17:08 pm »
I am looking to build a pair of subs in the $300-500 range (each) to match my Nexo PS10's. Size and weight is a factor. I'd like to keep it under 100lbs.
Logged

Rick Powell

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 252
Re: DIY Sub for Nexo
« Reply #1 on: November 27, 2010, 10:23:14 pm »
How about the B&C plans for a single 18" sub.  Should come in well under 100# and $500 a box, including speaker, if you don't get too fancy with the grille, cabinet hardware and cabinet coating.  

http://www.bcspeakers.com/SGG/PDF/207.pdf

The B&C 18TBX100, 18PZB100, 18PS100, or 18NW100 could be used.  The NW is the lightest of the 4.  You can buy the speakers, grille and hardware at Parts Express or several other outlets.

Logged
Rick Powell
StudioLive 16:4:2
JTR Triple 8 Mains
Danley TH115 Subwoofers
Bag End TA15 Floor Monitors
Crown xti6000/4000/2000

"There are two types of people...those who divide people into two types, and those who don't."

Charlie Tappa

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 92
    • http://www.PROSOUNDSERVICE.COM
Re: DIY Sub for Nexo
« Reply #2 on: December 02, 2010, 10:22:55 pm »
We are the B&C USA parts distributor in the USA, I'd be happy to help you with a design.  Just ask.

My contact info is listed below.

Charlie Tappa
President
Pro Sound Service Inc
Braintree, Ma. 02184 USA
Exclusive B&C USA Parts Distributor
ATM Flyware Stocking Distributor
Loudspeaker Repair and Parts Specialists
www.prosoundparts.com
info@prosoundservice.com
781-849-1285
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.022 seconds with 14 queries.