ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Chevin Research  (Read 2992 times)

Steve Nichols

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
Chevin Research
« on: November 12, 2010, 02:28:27 pm »

Hi Guys,

Any good/bad reviews on Chevin amplifier products? Everything I can find is 2-3 years old, but all good Smile


Josh Millward

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
  • Meridian, MS
Re: Chevin Research
« Reply #1 on: November 12, 2010, 03:56:44 pm »

At one point and time I was using a NEXO AphaE rig that was powered by Chevin A6000's and NEXO PS-15's powered by Chevin A3000's.

Like any good old AB design amplifier, as long as the power was available to the amps, they would do their job. They are heavy, but they are great, solid amplifiers.

I would not mind using or owning them one bit.

One nice feature on the A6000's was the level meter on the front panel. The A6000's also have two mains cords and two power switches as it is essentially two A3000's, bridged, in one chassis.

These are great amplifiers and I wouldn't mind having a few racks of them.
Josh Millward
Danley Sound Labs

(Brian) Frost

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 348
Re: Chevin Research
« Reply #2 on: November 13, 2010, 05:50:54 pm »

had a 4 channel amp that failed under light use.  was difficult to contact chevin, difficult to have repaired.  Sounded good when it worked.


Owner, Narnia Productions

Chicago IL

Good is good but not as good as better
Pages: [1]   Go Up

Page created in 0.065 seconds with 20 queries.