Miguel Castro Rios wrote on Thu, 16 December 2010 12:20 |
I don't have a chart like the one you guys are looking for...
Since I bought the plans...
This is what Bill says in the plans.
Quote: | Impedance LAB drivers have a nominal impedance of 6 ohms, but the mass of air in the horn adds about 2 ohms of acoustic impedance, giving a nominal 8 ohm load. In a 2x12 a pair of LAB 12s wired in parallel will have a nominal 4 ohm load, a pair in series a nominal 16 ohm load.
|
|
Thanks Miguel, that's exactly what we were expecting. Thank you for confirming that.
Take care,
Phil