ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All   Go Down

Author Topic: 44.1, 48k or 96k on 01v96  (Read 5718 times)

Dave Rickard

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2903
Re: 44.1, 48k or 96k on 01v96
« Reply #10 on: October 07, 2010, 10:50:23 PM »

Andy Peters wrote on Wed, 06 October 2010 18:03

Matt Vivlamore wrote on Wed, 06 October 2010 15:36

Andy Peters wrote on Wed, 06 October 2010 16:30

Matt Vivlamore wrote on Wed, 06 October 2010 11:57

correct me if I am wrong, but you loose half your channel count going to 96k.


You're wrong.

It's lose, not loose.

-a



Opps.. fixed



Wrong again.

It's oops, not opps.

-a



Stop, you're making my sides hurt!   Laughing
Logged
Dave
Yorkville dealer

"The wrong piece of gear, at the right price, is still the wrong piece of gear."

"If you don't have good stuff at each end of the signal chain, (mics and speakers) what you use in between is just turd polish."--Dave Dermont

Ned Ward

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 997
Re: 44.1, 48k or 96k on 01v96
« Reply #11 on: October 08, 2010, 10:12:25 AM »

recording at home in pro tools and with my zoom H2 - 24/96 sounds much better on things like acoustic guitar, vocals, drums, etc. You can mix and process and then bounce down to 16/44.1 and I've found the results sound better than starting with 16/44.1 to my ears.

In live sound, given all of the other unknowns, I think 24/44.1 would be fine and you won't miss the "air" (for lack of a better word) of 96K. Losing half your FX and half your ADAT channels isn't probably worth it.
Logged

TJ (Tom) Cornish

  • Newbie
  • *
  • Offline Offline
  • Posts: 0
Re: 44.1, 48k or 96k on 01v96
« Reply #12 on: October 08, 2010, 11:58:12 AM »

24 bits makes a difference, but I agree with the others on the sample rate - I envy your situation if the usual audio challenges of room acoustics and stage volume (not to mention band talent  Rolling Eyes ) are good enough to warrant 96Khz sample rates.  If that is truly the reality, you probably need a better board than the 01v96.
Logged
Pages: 1 [2]  All   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.034 seconds with 17 queries.