ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 [3]  All   Go Down

Author Topic: 2 crossovers in 1 box ??  (Read 5344 times)

Don Ullstrom

  • Newbie
  • *
  • Offline Offline
  • Posts: 18
Re: 2 crossovers in 1 box ??
« Reply #20 on: July 07, 2010, 06:48:41 pm »

Thanx Ron.  I'll do that.
Logged

Art Welter

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4874
Re: 2 crossovers in 1 box ??
« Reply #21 on: July 08, 2010, 09:33:29 pm »

Don Ullstrom wrote on Wed, 07 July 2010 13:29

Hi Art,

     Thanx for the info.  I'm thinking of buying a Peavey RX 22
driver to replace this Pyle.  Peavey recommends a 1200Hz / 12db slope crossover for it.  Would you recommend a higher crossover point ?

Thanx Art.

Don

Looks like 1200 Hz  12 dB per octave would be acceptable with that driver, but without hearing it just going by the specifications and frequency response graphs.

As Ron points out, Peavey crosses higher in their 12” monitor cabinet.

To “play  nice” with an E 120 will require a tricky crossover no matter what HF driver you choose.

The crossover is an integral part of the LF/HFCD/horn combination, and for decent results, all aspects of the combination must be matched.

Not an easy task even for those with years of experience doing it.
Logged
Pages: 1 2 [3]  All   Go Up
 

Page created in 0.048 seconds with 20 queries.