Art Welter wrote on Fri, 12 March 2010 19:13 |
Answering the four questions I asked in message #527890 would be helpful to determine how you arrive at your specs, and what they mean.
I’m not looking for the “easy” answer, I explained what I thought your current specs meant to the OP, then you said “Even the previous model was more capable than that ”.
Art Welter
|
Actually, they won't. Speakers are not resisters.
1) yes, some port compression, some power compression, some mechanical compression.
2) heat soaked
3) frequency dependent (power consumption tracks impedance curve)
4) frequency dependent (you'll never hit 3" peak to peak at 80hz and above)
You arbitrarily picked a 60hz sine wave. What if there is a large impedence peak at 60hz? You could put a ton of voltage in and not consume any power. This is why boardband testing is done. Everything in audio is averaged or depends.