ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: ATM350 for cymbals?  (Read 2175 times)

Matt Miller

  • Newbie
  • *
  • Offline Offline
  • Posts: 26
    • http://rockyouphotos.tumblr.com/
ATM350 for cymbals?
« on: September 29, 2010, 02:29:37 am »

Hi all,
Just a quick question.

I got a couple of these ATM350's as multi-tasking mics and read people use them for cymbal spot micing and hats.

How do you/ they secure them to a cymbal stand? I've seen no photos or read any info.
I thought maybe using the included velcro mount and wrapping it to a stand but it seems pretty dorky.

Any ideas?

Thank you,

Matthew.
Logged

John Cameron

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 763
Re: ATM350 for cymbals?
« Reply #1 on: September 29, 2010, 06:46:12 am »

I've done this in a pinch, put a regular mic clip on the stand and then clip the ATM350 to the mic clip..

John
Logged
JBL VRX / SRX / SR / Eon-g2
LSR4328P + LSR4312SP -studio
Yorkville Elite 2000EX
2-PL236
4-IT6K
Studiolive 24.4.2
Yamaha Digital
Rode / Shure / Sennheiser / Neumann / AKG

Matt Miller

  • Newbie
  • *
  • Offline Offline
  • Posts: 26
    • http://rockyouphotos.tumblr.com/
Re: ATM350 for cymbals?
« Reply #2 on: September 29, 2010, 07:15:17 am »

Thanks for mentioning that John,
Because of it I just thought of a great idea.

I've got a few A56D clamps spare, I could use them, forget about the allen bar and use that to clamp the ATM350 to.

Hmm I will have to try this tomorrow.
Logged

Jordan Wolf

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1889
    • http://www.facebook.com/howlingwolf487
Re: ATM350 for cymbals?
« Reply #3 on: September 29, 2010, 01:35:33 pm »

Matt Miller wrote on Wed, 29 September 2010 02:29

How do you/ they secure them to a cymbal stand? I've seen no photos or read any info.

Try using something like this clamp.  I got a similar set from Guitar Center that work nicely for tight miking situations.
Logged
Wolf
<><

"A lack of preparation on your part does not constitute an emergency on my part."
- Me

"With that much comb filtering you could probably part your hair just by walking through the room." - Dick Rees

Rob Spence

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2401
Re: ATM350 for cymbals?
« Reply #4 on: September 30, 2010, 12:18:30 am »

Jordan Wolf wrote on Wed, 29 September 2010 13:35

Matt Miller wrote on Wed, 29 September 2010 02:29

How do you/ they secure them to a cymbal stand? I've seen no photos or read any info.

Try using something like this clamp.  I got a similar set from Guitar Center that work nicely for tight miking situations.

Those are great. They are sold under lots of brand names including Audix. I don't remember what brand mine are.

Do a little Internet searching for them.
Logged
Rob Spence
Lynx Audio Services
E-Mail Rob -at- LynxAudioServices -dot- com

Staying out of trouble
  Is easier than
Getting out of trouble

Your local Whirlwind Dealer
Pages: [1]   Go Up
 

Page created in 0.019 seconds with 16 queries.