Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Phil Cimolai]

Hey,

I am looking for a source for Z Bars here in Calgary, Canada.  Apparently they are very difficult to find around here.  Any advice?

Thanks all.

[Nicolas Lowman]

If you are a do it yourselfer, you can pick up a piece of 1" wide aluminum from a hardware store, cut it to length and bam. I built a couple a few months ago, nothing to it. Just drill a hole where you want the mic clip to attach. I used 3/8 bolt through there into one of those 3/8 to 5/8 adapters that come with the mic clips to attach the clip onto the bar. Very easy project.....

[ProSoundWeb Community]