ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 ... 4 5 [6]   Go Down

Author Topic: MADE IN THE USA - how do you know?  (Read 12595 times)

Moby (Mike Diack)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 544
Re: MADE IN THE USA - how do you know?
« Reply #50 on: June 27, 2009, 05:31:45 pm »

Hal Bissinger/COMSYSTEC wrote on Fri, 26 June 2009 08:59

Hal,
Just a little clarification, the XTi series amplifiers are built here in Elkhart, Indiana.


That's good to hear Kevin.

-Hal


As soon as I see le words designed/assembled/engineered in the USA I immediately think "Made in China"
index.php/fa/23453/0/
But then I'm an old cynic
M
Logged

Tom Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2620
Re: MADE IN THE USA - how do you know?-Not all
« Reply #51 on: June 28, 2009, 07:21:06 am »

Plus there are a small number of other EV-owned factories scattered across the US. Some of them may build speaker components and/or microphones, if not complete speaker systems.

But this is based on several years old information and I (and perhaps no one out of the fold) knows what is where .... these days.

FWIW
Logged
Tom Young
Electroacoustic Design Services
Oxford CT
Tel: 203.888.6217
Email: dbspl@earthlink.net
www.dbspl.com

Robb Blumenreder

  • Full Member
  • ***
  • Offline Offline
  • Posts: 120
    • http://www.sennheiserusa.com
Re: MADE IN THE USA - how do you know?-Not all
« Reply #52 on: July 01, 2009, 11:11:37 pm »

If, perchance, you find yourself in need of wireless products that are Manufactured in the United States, Sennheiser - as well as Lectrosonics - both manufacture state-side.

http://www.lectrosonics.com/who/about.htm

http://www.sennheiser.com/sennheiser/home_en.nsf/root/about_ production

Sennheiser evolution wireless systems and components, as well as our new 2000 Series, are manufactured right here in the US in Albuquerque, NM. All of our wired microphones, however, are manufactured in Germany.

Karl - if you're monitoring this, can you confirm?

Good luck with the search!
Logged
Robb Blumenreder
Sennheiser Electronic Corporation

Karl Winkler

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 548
    • http://www.lectrosonics.com
Re: MADE IN THE USA - how do you know?-Not all
« Reply #53 on: July 05, 2009, 04:43:19 pm »

Robb Blumenreder wrote on Wed, 01 July 2009 21:11

If, perchance, you find yourself in need of wireless products that are Manufactured in the United States, Sennheiser - as well as Lectrosonics - both manufacture state-side.

http://www.lectrosonics.com/who/about.htm

Karl - if you're monitoring this, can you confirm?


Rob,

Yes - thanks for pointing this out. 100% of our products are made here in Rio Rancho, NM. Anyone who's been here for factory training has seen our stuff made from machined metal parts to plastic injection to circuit board population to assembly to testing. It usually surprises people to see all the different steps in one place.

And true, we're just about 10 miles from the Sennheiser plant.

They probably don't have the Rosewellite available to them, though... all that stuff was snapped up by the 1970's...  Smile
Logged
Karl Winkler

Lectrosonics, Inc.
Pages: 1 ... 4 5 [6]   Go Up
 

Page created in 0.043 seconds with 18 queries.