ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All   Go Down

Author Topic: Crown Xti questions  (Read 21062 times)

David "Luke" Landis

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 470
Re: Crown Xti questions
« Reply #10 on: June 15, 2009, 07:11:59 PM »

Ben Lawrence wrote on Mon, 15 June 2009 10:45

Im not really that concerned about the software working on a mac but they should consider that in the future,.


+10000
Logged

Ben Lawrence

  • Full Member
  • ***
  • Offline Offline
  • Posts: 208
    • http://vtaudiovisual.com/
Re: Crown Xti questions
« Reply #11 on: June 15, 2009, 10:23:39 PM »

Just tested the 2000 which I unlocked today. Its got issues still. Signal bleeding on one of the channels even when all the way down (intermitent). Power LED not functioning. Back to the factory I guess. Let you guys know on the 4000s.

Tim McCulloch

  • Newbie
  • *
  • Offline Offline
  • Posts: 0
Re: Crown Xti questions
« Reply #12 on: June 16, 2009, 12:59:00 AM »

Ben Lawrence wrote on Mon, 15 June 2009 21:23

Just tested the 2000 which I unlocked today. Its got issues still. Signal bleeding on one of the channels even when all the way down (intermitent). Power LED not functioning. Back to the factory I guess. Let you guys know on the 4000s.

Did you do a firmware update?
Logged
"Will you stand by me against the cold night, or are you afraid of the ice?" Crack The Sky

Ben Lawrence

  • Full Member
  • ***
  • Offline Offline
  • Posts: 208
    • http://vtaudiovisual.com/
Re: Crown Xti questions
« Reply #13 on: June 16, 2009, 08:08:06 AM »

Yes firmware installed.

Matt Vivlamore

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2118
    • http://www.meerkatsound.com
Re: Crown Xti questions
« Reply #14 on: June 16, 2009, 08:11:24 AM »

I think even with the DSP off, you can select how the input/output is set-up.

Did you check all input routing and output routing?

Post something over at the Crown forums, they've been very helpful for me.
Logged
Find us on the web at: meerkatsound.com

I'm using: EV QRx212 over JBL SRX718s(2) with Crown IT's and MRX512m & MRX525 on monitors with XTi's; all controlled by Yamaha LS9-32.  I have a bunch of other stuff too.

Joe Brugnoni

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1497
Re: Crown Xti questions
« Reply #15 on: June 16, 2009, 08:28:18 AM »

Is it bridged??
Logged
Be nice to everyone as you can learn something from anybody

David "Luke" Landis

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 470
Re: Crown Xti questions
« Reply #16 on: June 16, 2009, 05:27:14 PM »

Ben Lawrence wrote on Mon, 15 June 2009 22:23

Just tested the 2000 which I unlocked today. Its got issues still. Signal bleeding on one of the channels even when all the way down (intermitent). Power LED not functioning. Back to the factory I guess. Let you guys know on the 4000s.


Signal bleed is LED only, or can you hear it on the other ch? The ribbon cable might need to be re-set. I had this with one of mine, and it fixed it. It was LED only.

I have another that I might have the inputs summed, but in bridge mono mode. It will show both LEDs as well with one input. I asked on crown forum a long time ago, and the reply was not very clear to me, and I let it go as It seems to be an LED thing only. I have 4 XTi, and only one is "bleeding". I just need to power it up at home and hook up my wifes PC to see if I have Y input. Might need to reseat the cable on that one as well. It was a known issue on early XTi's.

Post back when you get results.
Logged

John Chiara

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2186
Re: Crown Xti questions
« Reply #17 on: June 17, 2009, 02:46:40 AM »

David "Luke" Landis wrote on Mon, 15 June 2009 19:11

Ben Lawrence wrote on Mon, 15 June 2009 10:45

Im not really that concerned about the software working on a mac but they should consider that in the future,.


+10000



Any new Mac can run windoz natively...as good as a PC.


Logged
"mix is a verb, not a noun" Sooo, as Aunt Bea would say.."Get to it!!!"

John A. Chiara aka. Blind Johnny
Albany Audio Associates Inc.
Troy, NY
518-961-0069 - cell

David "Luke" Landis

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 470
Re: Crown Xti questions
« Reply #18 on: June 17, 2009, 05:33:49 PM »

Yea, I know. I need to get a copy of XP. I hate to have set up my mac for 2 OS's. They need to just get a mac version, and make a bunch of us happy......
Logged
Pages: 1 [2]  All   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.035 seconds with 17 queries.