ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 3 [4] 5 6   Go Down

Author Topic: APB Dynasonics ProRack H1020  (Read 63562 times)

Jason Dermer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1366
Re: APB Dynasonics ProRack H1020
« Reply #30 on: November 14, 2007, 08:56:33 am »

We did not actually use the Lake processor, it was there because I was purchasing it from Bennett. IIRC, it was taken out of the box the "show it off" a bit.

All processing was done in the APB console and EONA boxes, no outboard whatsoever. Bennett and I laughed quite a few times during the evening about the irony of the demo being about losing all of the analog in your signal chain when recording, yet we were playing their electronica through pure analog end to end.

Overall a good day, and yes, it was also fun to blow away the preconceived notions of the average GC customer as to what a rackmount mixer and tiny little powered speakers could do. Smile
Logged
Jason Dermer
jason@asburyaudio.com
cell: 732-616-3463
office: 732-938-3100

"Rock & Roll and cars are just slightly different versions of the same mental disorder."- Peter Egan

Phil LaDue

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4039
Re: APB Dynasonics ProRack H1020
« Reply #31 on: November 14, 2007, 12:09:12 pm »

Jason Dermer wrote on Wed, 14 November 2007 08:56

We did not actually use the Lake processor, it was there because I was purchasing it from Bennett.

The same one he bought just over a month ago?

Bennett Prescott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 8924
    • http://www.adraudio.com
Re: APB Dynasonics ProRack H1020
« Reply #32 on: November 14, 2007, 01:26:17 pm »

Phil LaDue wrote on Wed, 14 November 2007 12:09

Jason Dermer wrote on Wed, 14 November 2007 08:56

We did not actually use the Lake processor, it was there because I was purchasing it from Bennett.

The same one he bought just over a month ago?

Yep, Jason needed one on short order and I'd gotten it for a good price, so I'm passing it on to him. I'll get another one soon, I'm just not in a hurry and he is.
Logged
-- Bennett Prescott
Director of North American Sales
ADRaudio d.o.o.
Cell: (518) 488-7190

"Give me 6dB and I shall move the world." -Archimedes

Steve Hurt

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1964
Re: APB Dynasonics ProRack H1020
« Reply #33 on: December 08, 2007, 02:26:43 pm »

Is there a way to sign up to Road Test one of the Pro Racks?

I am very interested if there is.

Who would I contact.

PM or e-mail to steve at floodstagestudio.com
Logged

Tim McCulloch

  • Newbie
  • *
  • Offline Offline
  • Posts: 0
Re: APB Dynasonics ProRack H1020
« Reply #34 on: December 08, 2007, 07:09:17 pm »

Steve-

The best way is to call Sarah Elliot at  415 387 4009 and chat with her, or Mark Herman.

Have fun, good luck.

Tim Mc
Logged
"Will you stand by me against the cold night, or are you afraid of the ice?" Crack The Sky

Chuck Augustowski

  • Full Member
  • ***
  • Offline Offline
  • Posts: 154
Re: APB Dynasonics ProRack H1020
« Reply #35 on: December 09, 2007, 12:42:57 pm »

I can not speak for doing a "Road Test", but if you or anyone wishes to evaluate a ProRack (or any other APB product), please send me an e-mail at Chucka@apb-dynasonics and I will pass your request to our local reps who can arrange for you to try one of our demo units that are out in the field.

Chuck Augustowski
APB-DynaSonics
Logged

Steve Hurt

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1964
Re: APB Dynasonics ProRack H1020
« Reply #36 on: December 09, 2007, 01:02:59 pm »

e-mail sent!  Thanks for the info!
Logged

Steve Payne

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 758
    • http://soundworksva.com
Re: APB Dynasonics ProRack H1020+M1016
« Reply #37 on: May 13, 2008, 01:44:03 pm »

Just a quick update on our APBs.  We have been using the 1020 constantly  for more than 6 months now and it has been flawless.  We just picked up an M1016 and we have been using it for support acts on larger shows and as a package with the H1020 out front on smaller shows.  A really cool set up that we just started using is shown in the attached pictures.  This allows one engineer to take out a small rig but still offer a very flexible and well controlled monitor situation.  We are really digging these small consoles.  Compact, light weight, feature rich, sound excellent and built like tanks.  Thanks for some great tools, APB!
index.php/fa/15832/0/
Logged
steve

"My favorite things turn money into noise"

"Too much power is just right", - Carroll Shelby

Steve Payne

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 758
    • http://soundworksva.com
Re: APB Dynasonics ProRack H1020+M1016
« Reply #38 on: May 13, 2008, 01:45:39 pm »

I just bought a midi cable so I could link the cue system next time.

index.php/fa/15833/0/
Logged
steve

"My favorite things turn money into noise"

"Too much power is just right", - Carroll Shelby

Steve Payne

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 758
    • http://soundworksva.com
Re: APB Dynasonics ProRack H1020
« Reply #39 on: June 10, 2008, 10:00:06 pm »

The ProRacks seem to be making a hit with the press as well with those of us using them daily in the trenches.  

http://www.nxtbook.com/nxtbooks/newbay/par_200805/index.php? startid=1

http://fohonline.com/index.php?option=com_content&task=v iew&id=1473&Itemid=39

I find we are leaving our 24 channel console set in the warehouse and taking out the H1020 / M1016 combination anytime we can squeeze into 16 channels.  Everybody who uses these things absolutely loves them.

Logged
steve

"My favorite things turn money into noise"

"Too much power is just right", - Carroll Shelby
Pages: 1 2 3 [4] 5 6   Go Up
 

Page created in 0.079 seconds with 21 queries.