ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 [3]  All   Go Down

Author Topic: Tuba 60 vs. ? ?  (Read 22299 times)

Phil Lewandowski

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
Re: Tuba 60 vs. ? ?
« Reply #20 on: December 16, 2010, 02:34:19 pm »

Miguel Castro Rios wrote on Thu, 16 December 2010 12:20

I don't have a chart like the one you guys are looking for...

Since I bought the plans...

This is what Bill says in the plans.


   LAB drivers have a nominal impedance of 6 ohms, but the mass of air in the horn adds about 2 ohms of acoustic impedance, giving a nominal 8 ohm load. In a 2x12 a pair of LAB 12s wired in parallel will have a nominal 4 ohm load, a pair in series a nominal 16 ohm load.

Thanks Miguel, that's exactly what we were expecting. Thank you for confirming that.

Take care,
"It is good to be Alive!"

L and L: Live Sound
Pages: 1 2 [3]  All   Go Up

Page created in 0.036 seconds with 22 queries.