ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All   Go Down

Author Topic: Gelable LED Par 64s  (Read 5273 times)

Shane Presley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 699
    • http://www.bssproductions.com
Re: Gelable LED Par 64s
« Reply #10 on: November 10, 2008, 01:27:42 PM »

Front lights I kept as par 64 500 watt with flesh tone gels - sorry if I mis-lead.  The rig looks cool even now ALL LED, I'll see if I have any pics.

Shane Presley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 699
    • http://www.bssproductions.com
Re: Gelable LED Par 64s
« Reply #11 on: November 10, 2008, 01:35:41 PM »

Keep in mind the 1st photo was taken with a nikon d80, and this photo taken with a small digital camera, maybe even a phone, not sure... index.php/fa/18853/0/

Mark Huber

  • Newbie
  • *
  • Offline Offline
  • Posts: 12
Re: Gelable LED Par 64s
« Reply #12 on: November 10, 2008, 02:19:47 PM »

Thanks for the info, I'm on the quest right now to see if our inexpensive (read:cheap) LEDs can produce a good flesh-tone color or not. Your second set of pictures aren't bad, but there's definitely a different color on the front guys. It does look like the camera was close and the flash went off which may or may not be helping.

Mark

Logged

Shane Presley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 699
    • http://www.bssproductions.com
Re: Gelable LED Par 64s
« Reply #13 on: November 10, 2008, 04:08:10 PM »

yeah for sure, plus I like to have our front lighting ran LOW as to not wash out the back.  This was a different date at that same club, and it was probably (from memory) a new guy running FOH, and lighting... I cautioned on wanting the front lights to be low, so that's probably what you are seeing... (like 25% or less on the fader)

James Feenstra

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1574
    • http://www.crewspace.com/James
Re: Gelable LED Par 64s
« Reply #14 on: November 10, 2008, 05:37:33 PM »

pretty close color wise, but i need something with considerably more output power
Logged
James Feenstra
Lighting, Audio and Special Effects Design
Pages: 1 [2]  All   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.094 seconds with 21 queries.