ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Toroidal filtering  (Read 1519 times)

Ron Wilson

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Toroidal filtering
« on: November 11, 2008, 12:02:39 pm »

NSI describes their dimmer as being "Dual SCR Circuit Design, Toroidal filtering". Is this a advantage over other brands I.E
less noise in sound systems, all things being equal?
Logged

Rob Timmerman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2025
Re: Toroidal filtering
« Reply #1 on: November 11, 2008, 07:06:24 pm »

Dual SCR design is what's been used in professional grade dimming for decades (the cheaper, low end option being Triacs, and the current SoTA being IGBT).

Toroidal filtering means that they put a (probably small) choke in series with the output of the dimmer circuit to get rid of some of the switching noise.  Again, this has been standard practice since the early days of electronic dimming.  The question is not if there is an output filter, but instead, how big is it (what's the rise time of the waveform)?  Minimal filtering will get a 350ms rise time, while better filtering will get a 500ms or 800ms rise time.

Both of those "features" are standard design practice in professional-grade dimmers
Logged
Pages: [1]   Go Up
 

Page created in 0.037 seconds with 19 queries.