ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All   Go Down

Author Topic: 70 Volt system com vs 70v  (Read 4001 times)

Craig Hauber

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 580
Re: 70 Volt system com vs 70v
« Reply #10 on: November 08, 2008, 04:01:49 pm »

I've been having good results with this product 804

It's intended for loudspeaker box builders, but it will produce a complete frequency versus impedance chart for the entire audio range.
You have to do the math to figure out how many "watts" the line equals but it also shows your exact results including line-loss and attenuators as well as showing the best spot to put your HPF if you want to maximize efficiency.

Another place the device excels is checking resultant impedances on those nasty 8-ohm house installs with all the speakers running off of a conventional home-stereo receiver.

Craig Hauber
CSA Productions Inc.
Ventura-Santa Barbara CA

Al Clayton

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 79
Re: 70 Volt system com vs 70v
« Reply #11 on: November 13, 2008, 09:52:27 pm »

Don't forget the Goldline ZM1. Actually reads in watts...
My techs prefer it. I prefer the ZM-104 myself. both will do the job!
Beer is proof that God Loves us and wants us to be happy. - Ben Franklin

Horray Beer!
Pages: 1 [2]  All   Go Up

Page created in 0.022 seconds with 19 queries.