Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Don Boone]

Clearone (Gentner) has a trade-in program for their (and competitor's) older gear when you up grade to the new Converge lines. You don't have to send the trade-in gear back to them just destroy and document it with digital photos.

So now comes the fun part, what methods of destruction should we use on the 2 units that are being removed? Suggestions so far:

Chop saw
Shotgun
Fire
Drowning (while plugged in of course)
Dragging behind a truck for a few laps around the parking lot.

Any other ideas?

Don

[Brad Weber]

Want to borrow my crossbow?

[Thomas Harkin]

Don Boone wrote on Tue, 30 September 2008 13:44

Clearone (Gentner) has a trade-in program for their (and competitor's) older gear when you up grade to the new Converge lines. You don't have to send the trade-in gear back to them just destroy and document it with digital photos. So now comes the fun part, what methods of destruction should we use on the 2 units that are being removed? Suggestions so far: Chop saw Shotgun Fire Drowning (while plugged in of course) Dragging behind a truck for a few laps around the parking lot. Any other ideas? Don

Pavement roller or the "LAB Room EQ" (TM)

Thomas

[Charlie Zureki]

Don Boone wrote on Tue, 30 September 2008 13:44

Clearone (Gentner) has a trade-in program for their (and competitor's) older gear when you up grade to the new Converge lines. You don't have to send the trade-in gear back to them just destroy and document it with digital photos. So now comes the fun part, what methods of destruction should we use on the 2 units that are being removed? Suggestions so far: Chop saw Shotgun Fire Drowning (while plugged in of course) Dragging behind a truck for a few laps around the parking lot. Any other ideas? Don

  Give it to Evan?      

  Sorry Evan... teasing you.

 Cheers,
 Hammer

[Karl P(eterson)]

I don't know where you are in the southeast, but if you are in the Atlanta area and you are going to do the distruction in the next couple weeks we have some steamrollers and a few "LAB Room EQ" (TM)'s on site.

Karl P

[Don Boone]

Karl

I'm in Greenville SC. That's tempting. I might take you up on it but I also found a machine shop just down the street.
I'm thinking press brake, while the unit displays the "Fatal Error" message it occasionally shows.

Don

www.mmsav.com

[Remy G. Santerre]

600V ?

[Don DeLong]

Can you say "Camlok to XLR adapter"?  

[Michael 'Bink' Knowles]

Don Boone wrote on Tue, 30 September 2008 11:44

... Any other ideas?

Photoshop.

-Bink

[Gerry Tacker]

Fireworks! The only way to go for documentation! Or call Karl Winkler and see if he has a high powered bowling ball cannon in development!