ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Installation DMX Cable  (Read 1910 times)

Adam Whetham

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3077
  • Grand Forks, ND
Installation DMX Cable
« on: July 23, 2008, 12:36:22 PM »
Looking for installation DMX Cable, single pair with ground.

I called gepco and they told me one of their cables with 110ohm is the normal one they sell for this...

DMX has always been 120ohm for me... but we're looking for installation cable/riser cable version of this... not rubber jacketed...

Will 110ohm work? Or what cable do you guys use?
Logged
-I practice safe excursion on the weekends.

"If you think it's expensive to hire a professional to do the job, wait until you hire an amateur." -Paul Neal "Red" Adair

John Birchman, CTS

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 560
    • http://www.jrbtechnical.com/
Re: Installation DMX Cable
« Reply #1 on: July 23, 2008, 02:35:42 PM »
Logged
John Birchman, CTS
Freelance AV and Stage Technician
JRB Technical
Lake Buena Vista, FL

Silas Pradetto

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3047
Re: Installation DMX Cable
« Reply #2 on: July 23, 2008, 11:06:40 PM »
DMX is 110 ohm by spec. You can use SHIELDED cat5 cable for installations with no problem. I know a high level lighting company that does this.
Logged
Pages: [1]   Go Up
« previous next »
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.032 seconds with 20 queries.