ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 [3]  All   Go Down

Author Topic: Who's got LAB  (Read 11454 times)

Jeff Babcock

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2313
Re: Who's got LAB
« Reply #20 on: July 31, 2008, 01:58:18 PM »

Karl Bruhn wrote on Thu, 31 July 2008 02:26

West epoxy used properly (including the filler additives) makes an indestructible joint allowing use of butt joints. The downside is it's messy to work with.



PL Premium will work just as well as West epoxy and will allow for butt joints.  The wood will break before the joint will come apart, it is super strong.  It also is great because it slightly expands to seal off any gaps, making it useful in horn sub building to help reduce chance of those pesky killer air leaks.  PL is also much less messy to deal with.

Note, you need PL PREMIUM, not some of the other grades of PL for best effect.

Pages: 1 2 [3]  All   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.02 seconds with 16 queries.