Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[christian gomez]

hi every budy;
i want know if is posible monitoring all my xti-400 amplifiers thru the HIQ-NET. on time???
thank you

[Silas Pradetto]

Yes it's possible. If you are going to be close to your amp rack, just get a USB hub for your computer and plug everything in. They should all show up in System Architect. If you need to be far away, use a Lantronix Ubox to convert USB to ethernet and run it to your computer up to 300 feet away.

[Jeff Babcock]

It will work, but not quite what I would call "real-time".  I have only played with it a bit with my XTI rack.  Maybe Ryan McLeod will comment, I know he has experimented with this a bit.

[Silas Pradetto]

You can adjust the sampling speed of the meters and get it pretty close to real-time, if you don't mind killing network bandwidth.

[Ryan McLeod]

I'm still struggling a little with the System Archtect / XTI combo (prooably becuase I'm used to the IQWic / IT combo) and I wouldn't quite call it real-time, but it does work.

I don't remember the LAB member that turned me on to the Belkin USB networkable hub, but it's a cool box that allows up to 6 USB devices to speak CAT-5 and it works great - I just connect to a wireless router. It allows me to speak to a rack of XTI's through wifi.

Of course, an inecpensive wireless hub would work as well if you don't mind the cable.

[ProSoundWeb Community]