ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: DMX Booster  (Read 1272 times)

Corey Ging

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
DMX Booster
« on: April 18, 2008, 09:26:16 AM »

I have searched the forum and found a few old topics, but wanted to get any new ideas.

I am looking for recommendations for a single channel DMX Booster.  I have looked at the Elation splitter/booster but that is more than I need.  Has anyone found or used a single channel DMX Booster?  Any other ideas?

Thanks.
Logged

John Birchman, CTS

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 560
    • http://www.jrbtechnical.com/
Re: DMX Booster
« Reply #1 on: April 18, 2008, 12:17:43 PM »

Why do you need a booster? Are you going more than 1000' feet?

If you are having problems and it is less than 1000' feet - do you have the data chain terminated?  

Why Terminate?
http://www.dfd.com/whyterm.html

Are you using the correct cable type, or using audio cable (which may work in some cases, but is not the correct cable for data/DMX)?  These are the two most common problems with DMX that I have seen, it's pretty robust when used correctly.

If you are going more than 1000' Doug Fleenor Design has a Isolation Amplifier (Model 121) that has a MSRP of $421.30.

http://www.dfd.com/121.html

John


Logged
John Birchman, CTS
Freelance AV and Stage Technician
JRB Technical
Lake Buena Vista, FL
Pages: [1]   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.031 seconds with 20 queries.