ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Old Magnets on Peavey BW speakers  (Read 3469 times)

Brad Gibson

  • Marketplace
  • Jr. Member
  • *
  • Offline Offline
  • Posts: 52
    • Capital A Productions
Old Magnets on Peavey BW speakers
« on: February 23, 2011, 12:02:33 AM »

Do the magnets on the 1505 go bad?  I have several 1505 and 1508 drivers that need some new baskets.
Logged
To be a trusted, valued and, respected, leader by being fair, fun, confident and honest.

MARK PAVLETICH

  • Newbie
  • *
  • Offline Offline
  • Posts: 40
Re: Old Magnets on Peavey BW speakers
« Reply #1 on: February 23, 2011, 01:20:31 AM »

No particular problem. If they have lost their magnetism, they can be re magnetised by some speaker workshops. Be careful to use the right replacement baskets to match the magnets you have as the later baskets often have deeper coil/former assemblies and they will bottom out in the older shallow magnets.
Logged

Sheldon Harris

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 78
Re: Old Magnets on Peavey BW speakers
« Reply #2 on: February 24, 2011, 07:32:46 PM »

make sure to clean the gap with masking tape (i double then fold in two) to get rid of any dust, rust and pieces of coil that may have collected in the gap.

pay close attention to the type of magnet structure used for which basket. all models except the 08 version will have no problem with hitting the back plate, the 08 series however should be placed on the magnet with the bump at the back and sightly raised pole piece.

i have had bw magnets sit for years until the cones turned to dust when touched and the magnets were still good.
Logged

ProSoundWeb Community

Re: Old Magnets on Peavey BW speakers
« Reply #2 on: February 24, 2011, 07:32:46 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.034 seconds with 25 queries.