ProSoundWeb Community

Church and H.O.W. Forums for HOW Sound and AV - Your Displayed Name Must Be Your Real Full Name To Post In The Church and HOW Forums => Church Sound => Topic started by: Jeff Classen on May 18, 2018, 09:38:35 pm

Title: Implementing Gain Structure Change
Post by: Jeff Classen on May 18, 2018, 09:38:35 pm
I have recently taken over managing our sound booth, and the volunteers who run it.

I quickly realized that our gain structure is all wrong. (main and monitor Amps at Max sensitivity, gains moderate, channel faders consistently running at -25db to -20db, master faders also at -20db)

I want to educate our volunteers and implement proper gain structure and maximize our S/N Ratio, mixing around unity on the channel and master faders. I cannot sit in the sound booth to train them as I am the music director and on the stage when this would be necessary.

Any thoughts as to how to implement this type of change?

Title: Re: Implementing Gain Structure Change
Post by: Scott Holtzman on May 18, 2018, 09:53:16 pm
Please update your display name to be your real name.

This is required by forum rules

Then we can talk about your question.

Sent from my VS995 using Tapatalk