ProSoundWeb Community
Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => Pro AV Forum => Topic started by: Mrnaz on February 24, 2018, 01:01:48 AM
-
I have a Behringer XR12 digital mixer with 4x XLR inputs and 8x 1/4 Jack Inputs.
The XLR inputs are balanced of course, bit I am asking about the 1/4" inputs. According to the manual, these inputs accept both balanced and unbalanced inputs.
I want to be sure what that actually means. Does that mean that if I use an XLR to TRS cable, the mixer will actually treat it like a balanced signal? Or will it accept a TRS plug and drop one conductor to effectively only take it as a TS plug?
The reason I ask is because I have quite a few long-run cables from balanced sources, and I want them to be handled as balanced signals in order to avoid interference.
-
I have a Behringer XR12 digital mixer
Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions (http://forums.prosoundweb.com/index.php/board,36.0.html) in the Forum Announcements section, and on the registration page when you registered.
Mac