ProSoundWeb Community
Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => LAB: The Classic Live Audio Board => Topic started by: John Chevalier on May 21, 2014, 08:04:04 PM
-
I need help looking for aluminum ramps . I need a 6 ft. ( dance floor ramp some call it 29 “ wide ) and a 12 foot 39 inches wide and a 16 ft. 39 inches wide. Does anyone have a reasonable resource. I have tried search that came up with blanks. Suppliers that have less than what we need and not available for 4-6 weeks. All bad. We use lots of heavy trunks full of feeder and gear that weighs more than 300 LBS., so we need a real ramps. Any help is appreciated.
John Chevalier
Chevalier Productions
230 G St
Anniston AL 36207
256-835-0360 office
256-835-0923 fax
256-239-1504 cell
www.chevalierproductions.net
-
I need help looking for aluminum ramps . I need a 6 ft. ( dance floor ramp some call it 29 “ wide ) and a 12 foot 39 inches wide and a 16 ft. 39 inches wide. Does anyone have a reasonable resource. I have tried search that came up with blanks. Suppliers that have less than what we need and not available for 4-6 weeks. All bad. We use lots of heavy trunks full of feeder and gear that weighs more than 300 LBS., so we need a real ramps. Any help is appreciated.
John Chevalier
Chevalier Productions
230 G St
Anniston AL 36207
256-835-0360 office
256-835-0923 fax
256-239-1504 cell
www.chevalierproductions.net
Trywww.grainger.com (http://www.grainger.com)
-
Trywww.grainger.com (http://www.grainger.com)
We did .. just not what I need there.
-
Try http://www.bpmfg.com/products
They have several dealers (Grainger is one) but I special ordered mine.
-
I need help looking for aluminum ramps . I need a 6 ft. ( dance floor ramp some call it 29 “ wide ) and a 12 foot 39 inches wide and a 16 ft. 39 inches wide. Does anyone have a reasonable resource. I have tried search that came up with blanks. Suppliers that have less than what we need and not available for 4-6 weeks. All bad. We use lots of heavy trunks full of feeder and gear that weighs more than 300 LBS., so we need a real ramps. Any help is appreciated.
John Chevalier
Chevalier Productions
230 G St
Anniston AL 36207
256-835-0360 office
256-835-0923 fax
256-239-1504 cell
www.chevalierproductions.net
New Haven Moving Equipment, Copperloy, probably a few others.
-
we need a real ramps. Any help is appreciated.
http://www.harmar.com/groups/5. I've had one of theirs for ten years. They might have what you need.
-
I need help looking for aluminum ramps . I need a 6 ft. ( dance floor ramp some call it 29 “ wide ) and a 12 foot 39 inches wide and a 16 ft. 39 inches wide. Does anyone have a reasonable resource. I have tried search that came up with blanks. Suppliers that have less than what we need and not available for 4-6 weeks. All bad. We use lots of heavy trunks full of feeder and gear that weighs more than 300 LBS., so we need a real ramps. Any help is appreciated.
John Chevalier
Chevalier Productions
230 G St
Anniston AL 36207
256-835-0360 office
256-835-0923 fax
256-239-1504 cell
www.chevalierproductions.net
discountramps.com is where i got my last one they made me a 32" wide 16' long. Not cheap but it was the best I could find at the time.
Item
Qty
Description
Options
Rate
Amount
AVRP-3516 1 Ramp, Aluminum Walk,16'Length, 32"Width,1500 lb Capacity, Perforations are in center 12 ½" of ramp,4 1/2:" side rails with 2 1/8" high curbs,standard with a 6" lip and 40" long safety chains $1,246.00 $1,246.00
Total $1,246.00
-
http://www.uline.com/BL_3883/Aluminum-Walk-Ramps
-
http://www.uline.com/BL_3883/Aluminum-Walk-Ramps
Take a look at MSC Industrial Supply (mscdirect is the website). They have walk ramps, forklift ramps, and dockplates (dance floors). MSC is a tool geek's wet dream - 150 pages of just drill bits (in a 4,000 page catalog). Better prices than uline, IIRC. Mark C.
-
I need help looking for aluminum ramps . I need a 6 ft. ( dance floor ramp some call it 29 “ wide ) and a 12 foot 39 inches wide and a 16 ft. 39 inches wide. Does anyone have a reasonable resource. I have tried search that came up with blanks. Suppliers that have less than what we need and not available for 4-6 weeks. All bad. We use lots of heavy trunks full of feeder and gear that weighs more than 300 LBS., so we need a real ramps. Any help is appreciated.
John Chevalier
Chevalier Productions
230 G St
Anniston AL 36207
256-835-0360 office
256-835-0923 fax
256-239-1504 cell
www.chevalierproductions.net
http://www.mcmaster.com/#walk-ramps/=s39f12 (http://www.mcmaster.com/#walk-ramps/=s39f12)
-
http://www.discountramps.com