ProSoundWeb Community
Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums => LAB Lounge => Topic started by: Garry Wilson on November 12, 2012, 02:11:28 PM
-
Just passing this info on for those that may need it.
noticed that one of my HF drivers was a little loose and needed to be re-tightened to the horn. Well, I found out it wasn't exactly what I was used to, which was to take the whole horn assy out the box and tighten the driver from the rear. Upon closer inspection I realized the bolts were at the front of the horn and covered by a black oval piece of adhesive paper, that hides a hex bolt. I have a bunch of allen wrenches around the house and NONE of them fit.....aaggggghhh! Picked up a 10 piece set of SAE and 10 piece metric (just in case) from Lowes for about $4 each.
The size is 3/16th.
Garry
98.6 Sound
-
I noticed that on my 712's. Were you able to get a replacement for the black oval cover?
-
I noticed that on my 712's. Were you able to get a replacement for the black oval cover?
Chuck,
I just peeled it back halfway, tightened the bolts and the put it back in place. Unfortunately, they didn't re-stick very well. I guess I need to look into replacements too. Looks like a call to JBL may be in order, if I find an answer quickly I'll let you know. If you do, let me know.
Thanks,
Garry
-
Black masking tape works just fine.
-
Black masking tape works just fine.
Good idea