Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

As amplification for Labs I will use a JAM SYSTEMS Q7, for tops a JAM SYSTEMS Q10, as a processor a db Mark DP48PLUS, and as a mixer a Presonus studiolive 32sc.

Great!
Post your pictures ! Looks like a great project!

Запой является одним из самых серьезных и опасных проявлений алкогольной зависимости, вызванным чрезмерным и регулярным потреблением алкоголя.
https://vyvod-iz-zapoya-20.ru/

\DUMB RUSSIAN SPAMMER!! SLAVA UKRAINE!!!

Looks like the venerable EAW SM222 has been resurrected - hopefully with Neo drivers

Only faital pro 12 is on neo, Eminence psd 3006 drivers are on ferrite

Запой является одним из самых серьезных и опасных проявлений алкогольной зависимости, вызванным чрезмерным и регулярным потреблением алкоголя.
https://vyvod-iz-zapoya-20.ru/

Запой является одним из самых серьезных и опасных проявлений алкогольной зависимости, вызванным чрезмерным и регулярным потреблением алкоголя.
https://vyvod-iz-zapoya-20.ru/

Welcome to https://Accsmarket.net, your go-to platform for purchasing a myriad of accounts across various digital platforms. Whether you're in need of social media, gaming, or streaming accounts, we provide a comprehensive solution to meet your requirements. With verified and reliable accounts, https://Accsmarket.net ensures a seamless and secure experience for all your digital endeavors.
 
Click to:Click today : https://Accsmarket.net

It's possible that there's not an external connection for the control.  Some lights put everything right on a single board, including the controller and IR and whatnot.  Over-riding that would mean cutting traces on the board and a whole bunch of monkeybusiness.

If you're doing this just by guess, there's a real chance that something could go horribly wrong and create an electrical shock hazard.  Not really the best plan.

The 3-pin wire at the bottom center would be my first suspect.

I have a DMX decoder I was able to use with a small 25W RGB floodlight for my escape room. I simply opened it up and intercepted the RGB wires and it worked great. We wanted more light so I bought the 80W version of it and its exactly what we want. However, when I opened it up, I could not for the life of me figure out where to connect a wire to control the R, G, & B signals. Both the lights were IR connected but like I said I hooked up the smaller light and it worked for what I needed exactly. So wherever I can add a wire and control the RGB signal is what I'm looking to you all for

I have a pic of the old smaller light and the new opened light. The light I need help with is the larger of the two with the 4 rows of LEDs.

HEres the link to the new lights I purchased.
https://www.amazon.com/dp/B0BTSQN697?psc=1&ref=ppx_yo2ov_dt_b_product_details